Wijzigingen aan stap #8
Bewerken voor johnsawyercjs —
Bewerking goedgekeurd door Taylor Dixon
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Once the cables are free, set the drive cage aside. | |
| - | [* black] To remove the hard drives from the cages, remove the four screws on the sides of the cage that are connected to the drives, |
| - | [* black] The two cages are cross compatible and can be put in either |
| - | [* black] The MDD does not have a 128GB drive limit like older |
| + | [* black] To remove the hard drives from the cages, remove the four screws on the sides of the cage that are connected to the drives, then slide the drives out. |
| + | [* black] The two cages are cross compatible and can be put in either location. |
| + | [* black] The MDD does not have a 128GB drive limit like older Macs. My MDD has 3 drives (a 400GB Hitatchi Deskstar, 40GB Seagate Barracuda 7200.7, and a 30GB Quantum Fireball LCT). |
| [* black] Note the ID jumpers on the two drive set. One is set to Master, the other to slave. A single drive can be set to Cable Select. |