Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door Ben Eisenman

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Lift the upper case off completely and disconnect the multicolored speaker cable from the logic board. As before, make sure you're pulling only on the connector and not on the socket.
-[* black] Tip: The multi-coloured cable is easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.
+[* icon_note] Tip: the multi-coloured cable may be easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.