iPad Pro 11" LiDAR Sensor Assembly Replacement stap #3 geschiedenis

Wijzigingen aan stap #3

Bewerken voor Nick Schultz — 14 mrt. 2025

Bewerking goedgekeurd door Nick Schultz

	[title] Separate the ambient light sensors
-	[* black] Insert one arm of your [product\|IF145-020-5\|angled tweezers] between the ambient light sensor and the screen. Or use a blade and make sure to remove the whole sensor and not just the ribbon cable.
+	[* black] Insert one arm of your [product\|IF145-020-5\|angled tweezers] between the ambient light sensor and the screen.
+	[* icon_note] You can also use a [product\|IF145-185\|precision knife\|new_window=true], but be careful not to damage the ribbon cable.
	[* black] Pry up to separate the sensor from the screen.
	[* icon_note] This might take significant force.
	[* black] Repeat this procedure for the other ambient light sensor.