Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Henry H

Bewerking goedgekeurd door Henry H

Voor
Na
Ongewijzigd

Stap regels

-[* black] Take off the cup filler by pushing the releasebutton on top.
-[* black] Unscrew the two PH#1 screws
-[* black] Push a little and the cup filler opens.
+[* black] Remove the spout by pressing the button on top and sliding it towards you.
+[* black] Unscrew the two PH#1 screws on the back of the spout.
+[* black] The spout halves should now separate easily but light prying might be necessary.