Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #20

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Lift the display up to a near-vertical position.
[* icon_note] At this point there is still a strip of adhesive along the bottom of the display, that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.
[* black] There are two strips left and right alongRemove as much of the bottom glue strip, where they reachadhesive as possible by grabbing it at the outer edges the last 20mm has no adhesive, effectively making right-angled lift-tabs, so you can remove these strips completely by carefullyedges, and then pulling them off from the outer endsor rolling toit towards the middle.
[* black] There are two strips left and right alongRemove as much of the bottom glue strip, where they reachadhesive as possible by grabbing it at the outer edges the last 20mm has no adhesive, effectively making right-angled lift-tabs, so you can remove these strips completely by carefullyedges, and then pulling them off from the outer endsor rolling toit towards the middle.