Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #3

Bewerking door Darren Chan

Wachtend op goedkeuring


Stap regels

[* black] Once you have verified that the power cord provides an adequate electrical connection, you will have to test that the cable is not [|shorted].
[* black] Use the multimeter leads to touch each prong on the AC side of the power cord. If the multimeter beeps, your power cord is bad and must be replaced immediately.
[* black] If your power cord has passed all of the steps above, then you have successfully tested that your power cord is in working order.