Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #2

Bewerking door Darren Chan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* yellow] '''Test for a potential open circuit.''' Use one multimeter lead to touch one of the prongs on the AC side of power cord. Use the other lead to touch one end of the console side of the power cord.
[* blackicon_note] If there is an adequate electrical connection, the multimeter will beep. If it does not beep the first time, try using the lead to touch the other prong.
[* black] Repeat'''Repeat the above directionsdirections''' in step 2 for the other outlet and prong of the power cord.
[* yellow] '''Test for a potential open circuit.''' Use one multimeter lead to touch one of the prongs on the AC side of power cord. Use the other lead to touch one end of the console side of the power cord.
[* blackicon_note] If there is an adequate electrical connection, the multimeter will beep. If it does not beep the first time, try using the lead to touch the other prong.
[* black] Repeat'''Repeat the above directionsdirections''' in step 2 for the other outlet and prong of the power cord.
[* icon_note] If the multimeter fails to beep on any of the occasions outlined above, your power cord is [http://en.wikipedia.org/wiki/Open-circuit_voltage|open]. In other words, you will need to replace the power cable.