Opening Procedure (1st and 2nd Gen) stap #23 geschiedenis

Wijzigingen aan stap #23

Bewerken voor Chayton Ritter — 9 feb. 2023

Bewerking goedgekeurd door Chayton Ritter

	[title] Unfasten the ambient light sensor cable bracket
-	[* black] Use a Phillips ~~PH00~~ screwdriver to remove the two screws securing the ambient light sensor cable bracket to the logic board:
+	[* black] Use a Phillips screwdriver to remove the two screws securing the ambient light sensor cable bracket to the logic board:
	[* red] One 1.3 mm screw
	[* orange] One 2.0 mm screw
	[* icon_note] Throughout this repair, [product\|IF145-491\|keep track of each screw\|new_window=true] and make sure it goes back exactly where it came from.
	[* icon_reminder] During reassembly, this is a good point to power on your iPad and test all functions before sealing it up. Be sure to power your iPad back down before you continue working.