Epson Home Cinema 2150 Projector Lamp Replacement stap #1 geschiedenis

Wijzigingen aan stap #1

Bewerken voor Luis Garcia — 30 nov. 2022

Bewerking goedgekeurd door Luis Garcia

-	[* ~~black~~] Disconnect device
-	[* black] ~~Turn~~ the Epson Home Cinema 2150 ~~to face~~ the large ~~access~~ panel ~~for the lamp~~.
-	[* ~~black~~] Unscrew the single holding screw from the access panel.
+	[* icon_caution] Disconnect and cool the device to room temperature. Failure to do so may result in electric shock or minor burns.
+	[* black] Orient the Epson Home Cinema 2150 so that the large indented panel faces your direction.
+	[* red] Unscrew the single 6mm Phillips#0 holding screw from the access panel.
	[* black] Slide the panel horizontally, then lift up to remove the access panel.