Wijzigingen aan stap #5
Bewerken voor Evan Gattuso —
Bewerking goedgekeurd door Evan Gattuso
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Use a spudger to pry the back case off by working around the perimeter of the device, starting from the bottom of the 2DS. | |
| [* icon_caution] Don't yank or pull the back case off because the camera ribbon is attached to the motherboard and back case and may rip or damage the cable or camera itself. | |
| - | [* red] Use the tip of a spudger, an opening tool, or your fingernail to flip up the small, hinged locking flap on the [ |
| + | [* red] Use the tip of a spudger, an opening tool, or your fingernail to flip up the small, hinged locking flap on the [guide|25629|camera cable|new_window=true]. |
| [* black] Use your spudger to gently slide the cable out of the connector. | |
| [* black] Remove the back case. |