Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart


Stap regels

-[* icon_reminder] Vertically turn the computer over so the bottom display screw is now easily accesible.
+[* icon_reminder] Turn the computer onto its opposite edge so the right display screw is now easily accesible.
[* icon_note] Before removing the last display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage.
[* red] Remove the last 4.9 mm T8 Torx screw securing the display to the upper case.