Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan


Stap regels

[* red] While holding the Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracket.
-[* icon_caution] Before removing the last display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage.
-[* orange] Remove the last 4.9 mm T8 Torx screw securing the display to the upper case.