Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Voor
Na
Ongewijzigd

Stap regels

-[* black] Use the tip of a spudger to flip up the retaining flap securing the microphone ribbon cable to the I/O board.
-[* black] Use the tip of a spudger to remove the volume button ribbon cable from its ZIF connector on the I/O board.
+[* black] Use the tip of a spudger to carefully flip up the retaining flap on the microphone ribbon cable ZIF socket.
+[* icon_caution] Make sure you are flipping up the retaining flap, ***not*** the socket itself.
+[* black] Carefully push the microphone ribbon cable straight out of its socket on the I/O board.