Wijzigingen aan stap #3
Bewerking door Walter Galan —
Bewerking goedgekeurd door Walter Galan
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Remove the following seven screws: |
| [* red] Six 1.6 mm Phillips screws securing |
| [* red] Six 1.6 mm Phillips screws securing |
| [* orange] One 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case. |
| [* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play. |