Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #4

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* blackicon_note] This step is only required if you have a MacBook Pro 15" Unibody Model A1286, otherwise move on to the next stepan anti-glare display.
[* blackicon_note] This step is only required if you have a MacBook Pro 15" Unibody Model A1286, otherwise move on to the next stepan anti-glare display.
[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[* black] Lift the AirPortBluetooth board/cable retainer assembly out of the upper case.
[* black] Lift the AirPortBluetooth board/cable retainer assembly out of the upper case.