Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #3

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] This step is only required if you have an anti-glare display. If you have a MacBook Pro 15" Unibody Model A1286glossy display, skip to step 12.
[* icon_note] This step is only required if you have an anti-glare display. If you have a MacBook Pro 15" Unibody Model A1286glossy display, skip to step 12.
[* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.
[* black] Use the flat end of a spudger to pry the AirPortBluetooth antenna cable from its socket on the board.
[* black] Use the flat end of a spudger to pry the AirPortBluetooth antenna cable from its socket on the board.