Ga door naar hoofdinhoud

Wijzigingen aan stap #12

Bewerking door kyle

Bewerking geweigerd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.
[* black] *The heat sink is also attached to the body on the end furthest from the logic board by one screw (not in pic) which must be removed or you will break the heat sink during removal.
[* icon_reminder] During reassembly, make sure the antenna cables are inserted into their respective notches on the logic board, as highlighted in the second picture.