Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #6

Bewerking door Austin Blakely

Bewerking goedgekeurd door Austin Blakely

Voor
Na
Ongewijzigd

Stap regels

[* yellow] Use a flathead screwdriver to release the two clips located on the back half of the drive assembly.
[* icon_note] The final clip doesn't need to be released; the top half of the drive assembly will slide away from the lower half.
[* black] Finish removing the top half of the drive assembly from the base.
[* icon_caution] Be careful not to detacheddetach the red wire or the white ribbon cable still attached.
[* icon_caution] Be careful not to detacheddetach the red wire or the white ribbon cable still attached.