Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Lauren

Bewerking goedgekeurd door Lauren

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* yellow] Remove the blue wire (as shown in yellow outline).
[*
by gently pulling.
[*
orange] RemoveShown in the third picture, remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly (shown in the third picture)assembly.
[* yellow] Remove the blue wire (as shown in yellow outline).
[*
by gently pulling.
[*
orange] RemoveShown in the third picture, remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly (shown in the third picture)assembly.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted in orange circles).