Skip to main content

Wijzigingen aan stap #2

Bewerking door Lauren

Bewerking goedgekeurd door Lauren

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* yellow] Remove the blue wire (as shown in yellow outline).
[* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assemblyassembly (shown in the third picture).
[* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assemblyassembly (shown in the third picture).
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted in orange circles).