Skip to main content

Wijzigingen aan stap #2

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* yellow] Remove the blue wire.
[* orange] Use a #1Remove the 4 Phillips Screwdriver to remove the four (4)#1 screws connecting the circuit board to the optical drive assembly.
[* orange] Use a #1Remove the 4 Phillips Screwdriver to remove the four (4)#1 screws connecting the circuit board to the optical drive assembly.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture