Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Robert Wagner

Bewerking goedgekeurd door Robert Wagner

Voor
Na
Ongewijzigd

Stap regels

[* black] At this point, your optical drive assembly should be separated from your GameCube (picture 1).
[* black] Flip the optical drive assembly upside down
[* red] Shown in picture 2, remove the 6 Phillips #1 screws with a philips screwdriver.
[* black] Once the screws are removed, gently lift and remove the metal plate (shown in picture 3).
[* icon_caution] Be carefulyellow] '''Be careful''' not to disturb the brown ribbon cable (highlighted in the yellow).
[* icon_caution] Be carefulyellow] '''Be careful''' not to disturb the brown ribbon cable (highlighted in the yellow).