Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door Lauren

Bewerking goedgekeurd door Lauren

Voor
Na
Ongewijzigd

Stap regels

[* black] At this point, your optical drive assembly should be separateseparated from your GameCube (picture 1).
[* black] Flip the optical drive assembly overupside down
[* red] RemoveShown in picture 2, remove the 6 Phillips #1 screws as shownscrews.
[* yellowblack] Once the screws are removed, gently lift and remove the metal plateplate (shown in picture 3).
[* icon_caution] Be careful not to disturb the brown ribbon cablecable (highlighted in the yellow).
[* black] At this point, your optical drive assembly should be separateseparated from your GameCube (picture 1).
[* black] Flip the optical drive assembly overupside down
[* red] RemoveShown in picture 2, remove the 6 Phillips #1 screws as shownscrews.
[* yellowblack] Once the screws are removed, gently lift and remove the metal plateplate (shown in picture 3).
[* icon_caution] Be careful not to disturb the brown ribbon cablecable (highlighted in the yellow).