Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Robert Wagner

Bewerking goedgekeurd door Robert Wagner

Voor
Na
Ongewijzigd

Stap regels

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown.
[* yellow] RemoveAfter the screws are removed, gently lift and remove the metal plate. DoBe careful not to disturb the brown ribbon cable.
[* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown.
[* yellow] RemoveAfter the screws are removed, gently lift and remove the metal plate. DoBe careful not to disturb the brown ribbon cable.