Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door JordanB500

Bewerking geweigerd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* red] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown.
[* yellowviolet] Remove the metal plate. Do not to disturb the brown ribbon cablecable, using a Phillips #1 Screwdriver, turn the small knob one quarter turn clockwise.
[* yellowviolet] Remove the metal plate. Do not to disturb the brown ribbon cablecable, using a Phillips #1 Screwdriver, turn the small knob one quarter turn clockwise.