Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #13

Bewerking door Julio

Bewerking geweigerd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] Put pieces of the sticker tape along the inner frame of the phone. also use any smaller pieces to fill in as much of the area.
[* black] make note when removing old adhesive where to put new adhesive. Also ensure you remove all old adhesive or you will have trouble setting the glass. DONT OVERLAP TAPE it will cause a bump to form that may compromise your new glass.
[* black] Put pieces of the sticker tape along the inner frame of the phone. also use any smaller pieces to fill in as much of the area.
[* black] make note when removing old adhesive where to put new adhesive. Also ensure you remove all old adhesive or you will have trouble setting the glass. DONT OVERLAP TAPE it will cause a bump to form that may compromise your new glass.
[* black] Clean up the digitizer with lint free wipes or a clean microfiber towel. I used some lens cleaner to leave it spotless and smudge free.