Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Angela Penaherrera

Bewerking goedgekeurd door Angela Penaherrera

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] You need to have lots of patience in this procedure. Take your time.
[* black] Hold the gun at about 3 inches from your phone (in this picture it looks like its right on top). With the heat gun set to low, heat up the borders for about 3 to 5 minutes.
[* black] If you are working with a hair dryer, it might take up to 1 hour.
[* black] This melts the glue that holds the glass to the digitalizer.