Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #3

Bewerking door rubixtriangle

Bewerking goedgekeurd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] The optical drive is screwed down to a metal plate.
[* black] Unscrew a total ofthe twelve (12) Phillips #2 screws around the outer edge of the optical drive unit metal plate.
[* icon_note] There are three (3) screws to the left of the metal plate.
[* icon_note] Four (4) screws around the back of the metal plate.
[* icon_note] Five (5) screws holding the right side of the metal plate to the Gamecube unit
drive.
[* black] Unscrew a total ofthe twelve (12) Phillips #2 screws around the outer edge of the optical drive unit metal plate.
[* icon_note] There are three (3) screws to the left of the metal plate.
[* icon_note] Four (4) screws around the back of the metal plate.
[* icon_note] Five (5) screws holding the right side of the metal plate to the Gamecube unit
drive.