Wijzigingen aan stap #5
Bewerken voor FarmYard Gaming —
Bewerking goedgekeurd door FarmYard Gaming
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [title] Careful of the wires |
|---|---|
| - | [* black] Two T8 screws hold down the cover over this. The blade connectors have a little tab lock that must be pushed while pulling them apart. black: temperature sensors, white: heater power (disconnects near the base, under a woven sleeve that slides out of the way. You don't need to touch the heatshrink). The servo connector pulls apart easily. |
| - | [* black] The arrows show the 4 places to disconnect the wires so you can separate the top from the bottom. The white connectors under the sheath may also have a tiny lock tab that you need to push in while pulling them apart. |
| + | [title] Managing the wires |
| + | [* black] Two T8 screws hold down the cover over this. The blade connectors have a little tab lock that must be pushed while pulling them apart. |
| + | [* black] The black wire is for the temperature sensors. |
| + | [* black] the white wire is for power (disconnects near the base, under a woven sleeve that slides out of the way. You don't need to touch the heatsink). The servo connector pulls apart easily. |
| + | [* red] The arrows show the 4 places to disconnect the wires so you can separate the top from the bottom. The white connectors under the sheath may also have a tiny lock tab that you need to push in while pulling them apart. |