Wijzigingen aan stap #5
Bewerken voor Dominik Schnabelrauch —
Bewerking goedgekeurd door Dominik Schnabelrauch
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Remove the battery | |
| - | [* black] Insert |
| + | [* black] Insert an opening pick between the long edge of the battery and its housing opposite the battery cable. |
| [* black] Slide the opening pick under the battery and lift up to pry the battery off of its housing. | |
| [* icon_caution] Make sure you push ***underneath*** the battery and not ***into*** it. Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event. | |
| [* icon_note] If you encounter significant resistance, pause and heat the adhesive further. | |
| [* black] Remove the battery. | |
| [* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery. | |
| [* icon_reminder] It is likely you can reuse the old adhesive with the new battery. If you wish to replace the adhesive instead, remove the old adhesive and wipe away any adhesive residue with a lint-free cloth and high-concentration isopropyl alcohol. |