Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door JamOrd5

Bewerking goedgekeurd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] NOTE: If you are not replacing the LCD screen, move on to the next step.
[* black] After removing the original screen, keep the logic board facing you the way it was.
-[* black] Take the new screen and slip the flexible piece of connecting circuitry under the grey plastic flap that you pried up in the previous step.
+[* black] Take the new screen and slip the flexible piece of connecting circuitry under the grey plastic flap that you pried up in step 10.
[* icon_caution] ***Handle the screen carefully as it is fragile.***
[* black] Push it gently but firmly until it does not move any further to the left, then close the grey flap.
[* black] After this, the screen can be pushed down and clicked back into place.
+[* black] To reassemble the phone, reverse instructions.