Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door CeeJay

Wachtend op goedkeuring


Stap regels

[* black] After removing the original screen, keep the logic board facing you the way it was.
[* black] Take the new screen and slip the flexible piece of connecting circuitry under the grey plastic flap that you pried up in the previous step.
-[* black] Push it gently but firmly until it does not move any furter to the left, then close the grey flap.
[* icon_caution] Be careful when handling the screen, it would not be good to break the new screen while trying to reinstall it.
[* black] After this, the screen can be pushed down and clicked back into place.