Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Shivan Barwari

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Flip the logic board over to the other side.
-[* black] Use a spudger to unclip the four clips shown in the picture. This releases the screen.
-[* icon_caution] The screen could fall after being disconnected.
+[* black] Use a spudger to unclip the top two clips shown in red, and then the bottom two. This releases the screen.
+[* icon_caution] Make sure to hold the screen, it could fall after being unclipped.