Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door CeeJay

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Flip the logic board over to the other side.
[* black] Use a spudger to unclip the four clips shown in the picture. This releases the screen.
-[* icon_caution] Caution! Do not do this step at any considerable vertical distance from the surface you are disassembing on. The screen could fall after being disconnected.
+[* icon_caution] Caution! The screen could fall after being disconnected.