Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door CeeJay

Wachtend op goedkeuring


Stap regels

[* black] Flip the logic board over to the other side.
-[* black] Use a spudger to unclip these four clips of the screen.
+[* black] Use a spudger to unclip the four clips shown in the picture. This releases the screen.
+[* icon_caution] Caution! Do not do this step at any considerable vertical distance from the surface you are disassembing on. The screen could fall after being disconnected.