Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #9

Bewerken voor Harvey —

Bewerking goedgekeurd door Harvey

Voor
Na
Ongewijzigd

Stap regels

[title] Remove Battery
-[* black] Use a heat gun and heat up the front side to loosen the adhesive holding the battery in place.
-[* black] Insert a thin , flexible tool to release the adhesive between the battery and frame. Caution is needed here to ensure that the tool does not go through the battery.
+[* black] Use a heat gun and heat up the front side of the display to loosen the adhesive holding the battery in place.
+[* black] Insert a thin , flat, flexible tool to release the adhesive between the battery and frame. Caution is needed here to ensure that the tool does not go through the batter casing.
[* black] Work slowly and reheat the front side if the adhesive does not feel as if it is coming loose.
[* black] Work along the side of the battery and eventually it will start to come loose.
[* black] Once one side is free, you can do the same on the other side and should be able to life the battery up and out.