| | [* black] Use a spudger to remover the connectors for the display, fingerprint sensor and main-sub board. |
|---|
| | [* black] The fingerprint sensor can be pried from the side to release it and remove it. |
|---|
| | [* black] Remove the retaining screw for the sub-board. |
|---|
| | [* black] Use a spudger to pry the sub-board loose. |
|---|
| | [* black] Once loose, pry the cables up to release them from the channel going up the side of the frame. |
|---|
| | [* black] Once the board and cables are loosened, the mainboard, sub-board and cables can all be removed together. |
|---|