Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Kyle Smith

Bewerking goedgekeurd door Kyle Smith

Voor
Na
Ongewijzigd

Stap regels

[title] Remove the battery
[* black] Lift and remove the battery.
[* icon_reminder] If there's any alcohol solution remaining in the device, carefully wipe it off or allow it to air dry before installing your new battery.
-[* icon_reminder] During reassembly, remove the old adhesive and apply [guide|137171|stretch release adhesive strips|new_window=true], double sided adhesive tape, or [guide|113604|pre-cut adhesive|new_window=true] to secure the new battery.
-[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard.
+[* icon_caution] Don't reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
+[* icon_reminder] To install a new battery:
+ [* black] Remove the old adhesive and residue from the battery well.
+ [* black] If your replacement battery doesn't come with replacement adhesive, apply [guide|137171|stretch release adhesive strips|new_window=true], double sided adhesive tape, or [guide|113604|pre-cut adhesive|new_window=true] in the iPad's battery well.
+ [* black] Peel away any tape liners to expose the adhesive.
+ [* black] Lay the battery on the adhesive and press firmly.