Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Kyle Smith

Bewerking goedgekeurd door Kyle Smith

Voor
Na
Ongewijzigd

Stap regels

[title] Insert a plastic card under the battery
[* black] Insert the corner of a plastic card between the lower end of the battery and the frame.
[* black] Press the card until approximately an inch and a half is underneath the battery.
+ [* icon_caution] Take care not to bend the battery—a bent battery may leak dangerous chemicals or cause a thermal event.
+ [* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.