Ga door naar hoofdinhoud

Wijzigingen aan stap #39

Bewerking door Robert Boyd

Bewerking goedgekeurd door Robert Boyd


Stap regels

[* black] Insert an opening tool near the bottom of the logic board and pry up with a slow and steady force to peel it away from the rear case.
[* icon_caution] Bending or warping the logic board could lead to permanent damage. If the adhesive feels extra stubborn, apply more heat and try again.
+ [* icon_note] Slide an opening pick underneath the bottom edge of the logic board to slice some of the adhesive if your logic board won't budge.