Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Saif Alkaabi

Bewerking goedgekeurd door Saif Alkaabi

Voor
Na
Ongewijzigd

Stap regels

-[* black] After each screws has been removed carefully turn over the controller, and place on a flat surface.
+[* black] After each screw has been removed, carefully turn over the controller, and place it on a flat surface.
[* black] Slowly separate the top panel from the bottom panel.
-[* icon_reminder] The buttons are loose and may fall off of the motherboard.
-[* black] Once seperarted set aside the top panel.
+[* icon_reminder] The buttons are loose and may fall off the motherboard.
+[* black] Once separated, set aside the top panel.
[* icon_note] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.