Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Lilia Johnson

Bewerking goedgekeurd door Lilia Johnson

Voor
Na
Ongewijzigd

Stap regels

-[* black] When all screws are removed, carefully turn over the controller and place on a flat surface.
-[* black] Slowly lift the now free panel from the top of the controller.
-[* icon_note] The buttons are loose and may fall off of the motherboard.
-[* black] Once lifted, set aside the panel.
-[* icon_reminder] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.
+[* black] After each screws has been removed carefully turn over the controller, and place on a flat surface.
+[* black] Slowly separate the top panel from the bottom panel.
+[* icon_reminder] The buttons are loose and may fall off of the motherboard.
+[* black] Once seperarted set aside the top panel.
+[* icon_note] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.