Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Kristen Gismondi

Bewerking goedgekeurd door Kristen Gismondi

Voor
Na
Ongewijzigd

Stap regels

-[* black] After each screw has been removed, carefully turn over the controller, and place it on a flat surface.
+[* black] Carefully turn over the controller and place it on a flat surface.
[* black] Slowly separate the top panel from the bottom panel.
-[* icon_reminder] The buttons are loose and may fall off the motherboard.
+[* icon_note] The buttons are loose and may fall off the motherboard.
[* black] Once separated, set aside the top panel.
-[* icon_note] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.
+[* icon_reminder] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.