Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Kristen Gismondi

Bewerking goedgekeurd door Kristen Gismondi

Voor
Na
Ongewijzigd

Stap regels

-[* red] Remove the eight 9-mm Tri-Wing screws on the back panel using the Tri-wing Y1 screwdriver.
-[* icon_note] During reassembly, firmly hold the panels of the controller together while replacing screws so the panels do not separate.
+[* red] Remove the eight 9 mm screws from the back panel using the Tri-point Y1 screwdriver.
+[* icon_reminder] During reassembly, firmly hold the panels of the controller together while replacing the screws so the panels do not separate.