Ga door naar hoofdinhoud

Wijzigingen in stap #14

Bewerken voor Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] On the lower PCB, we get a good look at one of the two analog joysticks. Its spring-loaded movement is tracked by two potentiometers that measure degrees of tilt in two axes.
[* icon_note] Potentiometers are analog devices that vary their resistance with position—this makes for an ideal low-power sensorsensor, as only a small amount of power is required to measure resistance.
[* icon_note] Potentiometers are analog devices that vary their resistance with position—this makes for an ideal low-power sensorsensor, as only a small amount of power is required to measure resistance.
[* black] With a quick flick of a plastic opening tool, we release the plastic clips holding the shoulder buttons spring assembly in place.