Skip to main content

Wijzigingen aan stap #14

Bewerking door Brittany McCrigler

Bewerking goedgekeurd door Brittany McCrigler

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] On the lower PCB, we get a good look at one of the two analog joysticks—its spring-loaded movement is tracked by two potentiometers that measure degrees of tilt in two axes.
[* icon_note] Potentiometers are analog devices that vary their resistance with position—this makes for an ideal low-power sensor for this applicationsensor.
[* black] A quick flick of the plastic opening tool and we release the plastic clips holding the shoulder buttons spring assembly in place
.
[* icon_note] Potentiometers are analog devices that vary their resistance with position—this makes for an ideal low-power sensor for this applicationsensor.
[* black] A quick flick of the plastic opening tool and we release the plastic clips holding the shoulder buttons spring assembly in place
.