Ga door naar hoofdinhoud

Wijzigingen aan stap #13

Bewerken voor Dominik Schnabelrauch

Bewerking goedgekeurd door Dominik Schnabelrauch

Voor
Na
Ongewijzigd

Stap regels

[title] Final Thoughts
-[* green] standard philip screws
-[* yellow] adhesive doesnt seem to be very strong but no IP rating
-[* yellow] some components are modular(flash, battery, screen, front camera) ---- charging port, sim tray, rear camera are not
-[* yellow] screen and battery can be replaced on their own however more than 3 steps deep, battery has pull tab
-[* red] full glass body makes break damage more likely and curved glass requires special tools or is likely to break during repairs
-[* red] to replace fingerprint you need to replace display (likely gets damaged) and the fingerprint has strong adhesive
+[* green] Only one standard Phillips screwdriver needed.
+[* yellow] The adhesive isn't super stubborn although that might be because of the lacking IP rating.
+[* yellow] Many components are modular.
+[* yellow] The screen and battery can be replaced separately however because of other cables they might be tedious.
+[* red] The full glass body makes break damage more likely and the curved glass requires special tools or is likely to break during repairs.
+[* red] To replace the in-display fingerprint you need to remove the whole display which might result in a broken screen.