Wijzigingen aan stap #6
Stap regels
| + | [title] Putting the panel on, putting on the bottom case |
|---|---|
| + | [* black] I put the panel back on for my computer. I'd imagine its optional but I did it just to be safe |
| + | [* black] The panel is put on by putting the panel in the ridge between the outside tabs(the ones used to release it) and the inside tabs (closest to the memory slot) |
| + | [* black] The panel is secured by pushing the outside tabs onto the panel (Picture 2) |
| + | [* black] To put on the bottom case, line it up using the hinge and the cutout for the hinge, then make sure the screws line up |
| + | [* black] Screw down the Phillips till they're tight be careful not to strip them. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd
Afbeelding 2
Geen vorige afbeelding
Toegevoegd
Afbeelding 3
Geen vorige afbeelding
Toegevoegd