Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerken voor Jeblank

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* blue] Pull up on the screen casing to separate the sliding shaft hinge.
-[* green] Caution: Do not pull up too far or the wire hinge may deform.
-[* green] Pull the screen casing to the right (as seen in the picture) and up to separate the wire hinge and release the joint.
+[* black] Pull up on the screen casing to separate the sliding shaft hinge.
+ [* blue] Do not pull up too far or the wire hinge may be damaged.
+ [* green] Pull the screen casing to the right and up to separate the wire hinge and release the joint.
[* black] Weave the wires and ribbons through the wire hinge to completely separate the screen and bottom casings.