Repareer je spullen Gemeenschap Winkel

Wijzigingen in deze stap

Bewerken voor bushing —

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Next, lift up the Wi-Fi board and remove the white connector on the underside of the Wi-Fi board.
-[* red] Remove the connector by placing the spudger underneath the wire and prying up.
+[* black] Lift up on the Wi-Fi module to remove it from the DSi.
+[* red] Disconnect the white antenna cable from the underside of the Wi-Fi module by prying it away from the module with a spudger. You may also need to remove a small piece of white tape that secures the cable to the module.